Rank: Member
Groups: Registered
Joined: 4/02/2010(UTC)
Posts: 47
|
As mentioned, I have a 3.36 Banjo LSD requiring a rebuild (still running - not damaged, just loose). Any recommendations in East/South East side Melbourne who know what they are doing and can accurately machine spacers between the cones and gears as required, set-pre loadings, etc, etc.
Any recommendations welcome or forum users who can complete.
Geoff
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 30/04/2005(UTC) Posts: 470  ![New Zealand]( "New Zealand") Was thanked: 15 time(s) in 14 post(s)
|
I have not repaired one of these for a long time but, I machined the cones until they did not touch the bottom of the housing & then used standard Holden shims ( I had lots of diffs in bits ) to get the tension on the cones & mesh of the spider gears correct . Hope this helps Mark. |
life is good in "Wine & Holden Marlborough " |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
