Rank: Member
Groups: Registered
Joined: 27/03/2014(UTC)
Posts: 9
|
hi im haveing trouble finding a oil pump to fit my hk 307 with atandard sump.
the one i got from repco is to big and hits the sump please i need any help i can get thanks
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 27/12/2009(UTC)
Posts: 300
|
It's probably not the pump that's causing the problem, but the pickup (the pipe that comes out of the pump). Chev's in HK's require a special pickup. As far as I know, no one is reproducing them and you certainly won't get one from Repco. You'll have to find an original second hand one. Ebay and Gumtree are the usual sources. You'll also need the special bolt that locates the pickup on one of the main bearing caps.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 27/03/2014(UTC)
Posts: 9
|
Oh ok thanks i have a pick up out of a 308 ht or g will that fit
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717
Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
|
No, you need a HK-HG Chev one. |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 27/12/2009(UTC)
Posts: 300
|
The pic below will give you some idea of what a HK / Chev pickup looks like. The bolt shown in the pic that supports the pickup to the bearing cap is not the standard bolt because this is a 4 bolt block, but gives you the general idea. 
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 27/03/2014(UTC)
Posts: 9
|
will have a look thanks for your help mate
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
