Rank: Member
Groups: Registered
Joined: 13/01/2010(UTC)
Posts: 15
|
hi guys im in the middle of a injected 5.0 conversion to my zl fairlane i have changed the whole wiring loom in the whole car eb dash is in also all is in working order dash windows ecc i need help with the gearbox mount ,ac,engine mounts and left hand side header has any one done this conversion if so a little help would be great cheers
|
aaron |
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 2,898
Was thanked: 2 time(s) in 2 post(s)
|
OK when I converted Dads old XF from an auto to a T5 I needed a completely different gearbox cross member for the T5 as the T5's mount was about 2 inches lower and about 2 inches further back than the normal XF mount.
So it might be an idea to have a look at the gearbox mount on a 6 cylinder auto XG ute or van as I believe that they still have the XF floor. Maybe even an XH but I think that they have an E series floor.
As for engine mounts you simply use the bolt on brackets from any V8 XA - XE and the mounting rubbers from any V8 XR - XE Windsor or Cleveland they are the same and will bolt directly up to your 5.0 block.
I'm doing a 5.0 into a Capri and I intend to use early 302W extractors with bosses welded in for the oxygen sensors and flanges for the cats so you might get away with XR, XT, XW XY 302W extractors.
Sorry I can't offer much about the A/C you may have to get pipes custom made to connect the ZL A/C to the E series compressor.
|
|
|
|
|
|
|
Rank: Member
Groups: Moderator, Registered
Joined: 22/04/2010(UTC)
Posts: 473
|
My only 5l conversion was with an auto au motor into an xg, auto didn't need any mods so I guess just get an xg cross member, engine mounts were as per above, exhaust was stubby mustang headers with custom lower pipes but e series are easier I believe due to the starter motor being on different sides, au ac never fitted because it fouled on the body
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 2,898
Was thanked: 2 time(s) in 2 post(s)
|
quote:
Originally posted by BIGCAV
My only 5l conversion was with an auto au motor into an xg, auto didn't need any mods so I guess just get an xg cross member
Was the XG cross member kind of horse shoe shaped and did it look like it would bolt up under an XD XE or XF? I'm just trying to satisfy my own curiosity here that's all as I have never looked under an XG. |
|
|
|
|
|
|
Rank: Member
Groups: Moderator, Registered
Joined: 22/04/2010(UTC)
Posts: 473
|
honestly i cant remember mate, we only did it on stands and slid the motor in from the bay with the tranny and found it bolted in ok so spent a total of 2 minutes looking at it
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 13/01/2010(UTC)
Posts: 15
|
thanks allot guys jim5.0 i know what you are talking about with the cross member i went looking for one at the wreckers cause i have seen one before i did have one my self used it on a mates car with his conversion now i need one and bigcav yeah i tried some mustang extractors and yeah the left side was hitting the starter motor so what did you do with yours and the ac hits the strut tower so what did you do about that one allso and cheers again |
aaron |
|
|
|
|
|
Rank: Member
Groups: Moderator, Registered
Joined: 22/04/2010(UTC)
Posts: 473
|
we were never trully happy with the exhaust, your probably best of posting on my other website www.xfalcon.com and asking there, i know plenty others have done the e series conversion the stubby mustang headers bent a bit worked, cant remember which one we used but it was from vpw http://www.vpw.com.au/pr...CatID=834&PrdGrpID=4353
again this was au motor not e series couldnt get a fix for the aircon, was considering custom fitting an older compressor but never looked into it, we just never ran aircon
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 2,898
Was thanked: 2 time(s) in 2 post(s)
|
You could ask this fellow some questions regarding exhaust and A/C. http://www.allclassified...display-ad?cid=123230244 |
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
