Rank: Member
Groups: Registered
Joined: 6/07/2007(UTC)
Posts: 86
|
This should be a simple problem, but I can't solve it as I don't have a wiring diagram. If anyone could shed some light that would be appreciated...
Basically the flasher can in the girl's VS wagon is not getting the +12V when the ignition is on, so the indicators don't work. Everything else seems to work, even the hazards. As a temporary measure I have removed some wiring from the back of the hazard light switch so that the indicators now work perfectly providing you have the hazard light switch turned on.
All fuses seem OK, and short of a workshop manual I can't figure it out.
Any ideas?
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 3,135
Thanks: 1 times
Was thanked: 35 time(s) in 33 post(s)
|
Common issue with VR/VS. The fault is in the hazard switch.
When the blinkers fail, wiggle the switch (don't press it all the way in) and they will come good.
You've "solved" the issue by wiring around the problem. |
Cheers,
Mick
_______________________________________________________________
Judge a successful man not on how he treats his peers, but on how he treats those less fortunate. |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
