Rank: Newbie
Groups: Registered
Joined: 26/06/2019(UTC) Posts: 2 ![Australia]( "Australia") Location: Victoria
|
I am currently getting a HK back on the road and bought a set of rare spares studs and nuts to replace all the old ones. The nuts are correct taper for HK and the outside diameter is 3/4”. The mechanic who is doing the roadworthy and some other repairs made contact today and is under the impression they should be 13/16”. Can someone confirm what it should be, 3/4 or 13/16 of an inch?
Cheers
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,064
Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
|
All Holden wheel nuts from FE to WB are 3/4-inch A/F.
The taper changed at HT. FE to HK have the shallow taper & HT to WB have the deeper taper. Threads are all 7/16 UNC.
Dr Terry |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 26/06/2019(UTC) Posts: 2 ![Australia]( "Australia") Location: Victoria
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 16/04/2014(UTC) Posts: 768  Location: Victoria Thanks: 1 times
Was thanked: 49 time(s) in 47 post(s)
|
Originally Posted by: Dr Terry  Threads are all 7/16 UNC.
Dr Terry I believe the studs and nuts are 7/16" x 20TPI, which is 7/16" UNF, not UNC.
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,064
Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
|
Originally Posted by: gm5735 Originally Posted by: Dr Terry Threads are all 7/16 UNC.
Dr Terry I believe the studs and nuts are 7/16" x 20TPI, which is 7/16" UNF, not UNC. You are correct. My typo or was it fat fingers. Dr Terry |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
