Fastlane
»
Holden Forums
»
Holden Technical Talk
»
HZ sedan banjo diff rear sway bar
Rank: Newbie
Groups: Registered
Joined: 10/09/2021(UTC) Posts: 1 ![Australia]( "Australia") Location: Adelaide
|
Will a hz banjo rear sway bar fit a Salisbury v8 10 bolt diff in a hz?
I have found a banjo diff with rear sway bar and want to fit it to my Salisbury diff.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 30/04/2005(UTC) Posts: 462  ![New Zealand]( "New Zealand") Was thanked: 14 time(s) in 13 post(s)
|
6 cly bar is 9946483 and V8 bar is 9947541 , but could just be a diameter difference ? |
life is good in "Wine & Holden Marlborough " |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/07/2019(UTC) Posts: 352 ![Australia]( "Australia") Location: bayside Melbourne Thanks: 219 times
Was thanked: 26 time(s) in 26 post(s)
|
Originally Posted by: Mav  Will a hz banjo rear sway bar fit a Salisbury v8 10 bolt diff in a hz?
I have found a banjo diff with rear sway bar and want to fit it to my Salisbury diff. tape measure jobbie... measure the distance between the brackets... if the banjo and Salisbury distances are the same then the only other issue is the insulator as the V8 one is thicker |
Club circuit racing...the best fun you can have with your pants on |
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,025
Thanks: 1 times
Was thanked: 198 time(s) in 181 post(s)
|
Originally Posted by: Smitty2 Originally Posted by: Mav Will a hz banjo rear sway bar fit a Salisbury v8 10 bolt diff in a hz?
I have found a banjo diff with rear sway bar and want to fit it to my Salisbury diff. tape measure jobbie... measure the distance between the brackets... if the banjo and Salisbury distances are the same then the only other issue is the insulator as the V8 one is thicker What about a different shape (larger loop ?) because of the larger diff bulge ? I'm not sure, just asking. Dr Terry |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,583
Thanks: 1 times
Was thanked: 483 time(s) in 461 post(s)
|
6cyl 1s 14mm. V8 is 16mm. |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/07/2019(UTC) Posts: 352 ![Australia]( "Australia") Location: bayside Melbourne Thanks: 219 times
Was thanked: 26 time(s) in 26 post(s)
|
Originally Posted by: Dr Terry Originally Posted by: Smitty2 Originally Posted by: Mav Will a hz banjo rear sway bar fit a Salisbury v8 10 bolt diff in a hz?
I have found a banjo diff with rear sway bar and want to fit it to my Salisbury diff. tape measure jobbie... measure the distance between the brackets... if the banjo and Salisbury distances are the same then the only other issue is the insulator as the V8 one is thicker What about a different shape (larger loop ?) because of the larger diff bulge ? I'm not sure, just asking. Dr Terry Holden used the same shape bar on Commodores and also on WB I recall .. with both the small and large Salisbury diff cenrtres which have rather different diff covers.. but still not 100% on this Edited by user Wednesday, 24 May 2023 9:01:16 PM(UTC)
| Reason: Not specified |
Club circuit racing...the best fun you can have with your pants on |
|
|
|
|
|
Fastlane
»
Holden Forums
»
Holden Technical Talk
»
HZ sedan banjo diff rear sway bar
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
