Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

HK-Q-Z5.0Lfan Offline
#1 Posted : Thursday, 4 April 2024 2:28:01 PM(UTC)
HK-Q-Z5.0Lfan

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2018(UTC)
Posts: 108
Man
Australia

Thanks: 5 times
Was thanked: 4 time(s) in 4 post(s)
VZ SV6 tailshaft centre bearing:

Getting different info, some mechanics said to get an exchange tailshaft, which owner dosent really want to do, as this is a low k, one owner, looked after car.
Other mechs say, yes we change the centre, no worries. Local Holden parts say it isn't a serviceable part, but auto parts place, (plus eBay, etc) have available.
Then go to order the replacement & get asked for measurement of bracket, plus tube size. One asked for the vin, then said there was 4 choice's!

So, what is the best way to make sure we get the correct centre bearing?
Dr Terry Offline
#2 Posted : Thursday, 4 April 2024 3:50:41 PM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,057

Thanks: 1 times
Was thanked: 202 time(s) in 183 post(s)
Where do you live ? I can supply a quality replacement unit.

PM me your rego number & I will give you a quote.

Dr Terry
If at first you don't succeed, just call it Version 1.0
Smitty2 Offline
#3 Posted : Thursday, 4 April 2024 8:58:07 PM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 379
Australia
Location: bayside Melbourne

Thanks: 237 times
Was thanked: 28 time(s) in 28 post(s)
Originally Posted by: HK-Q-Z5.0Lfan Go to Quoted Post
VZ SV6 tailshaft centre bearing:

Getting different info, some mechanics said to get an exchange tailshaft, which owner dosent really want to do, as this is a low k, one owner, looked after car.
Other mechs say, yes we change the centre, no worries. Local Holden parts say it isn't a serviceable part, but auto parts place, (plus eBay, etc) have available.
Then go to order the replacement & get asked for measurement of bracket, plus tube size. One asked for the vin, then said there was 4 choice's!

So, what is the best way to make sure we get the correct centre bearing?


my experience... have rebuilt the Commodore centres - being CV joint and bearing on high kilometre shafts and then taken them to a shop for balancing (worth the bucks if unis also replaced)
and for that used the original OEM Hardy Spicer kits (GMH got the shafts from them) to do the rebuild. But only the bearing if noisy on low kilometer cars
and
also handed a few I reckon were not straight/twisted (a look down the shaft showed the unis were obviously out of alignment by 15-20°) to Hardy Spicer (.. who were convenient to me)

Beware Spicers and balancers have a habit of painting the shafts.. especially if balance weights are added by welding
Club circuit racing...the best fun you can have with your pants on
Dr Terry Offline
#4 Posted : Friday, 5 April 2024 7:10:07 AM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,057

Thanks: 1 times
Was thanked: 202 time(s) in 183 post(s)
There are 3 basic parts to the centre bearing in those models. There's the CV joint, which gives very little trouble unless the boot is split. Then there's the bearing itself, which again seems to give very little trouble.

The 3rd part is the rubber bearing support, this is what is usually cactus. Most times you just need a new bearing with its rubber surround.

Dr Terry
If at first you don't succeed, just call it Version 1.0
HK-Q-Z5.0Lfan Offline
#5 Posted : Friday, 19 April 2024 2:59:27 PM(UTC)
HK-Q-Z5.0Lfan

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2018(UTC)
Posts: 108
Man
Australia

Thanks: 5 times
Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: Dr Terry Go to Quoted Post
Where do you live ? I can supply a quality replacement unit.

PM me your rego number & I will give you a quote.

Dr Terry


I OK.
will send you a message
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.030 seconds.