Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
Seatbelts in HJ 1 tonner
Options Go to last post Go to first unread
Previous Topic Next Topic
Taztiger4 Offline
#1 Posted : Sunday, 19 February 2023 10:46:42 AM(UTC)
Taztiger4

Rank: Member

Reputation:

Groups: Registered
Joined: 15/09/2022(UTC)
Posts: 84
Australia
Location: Perth

Thanks: 37 times
Hi

Trying to fit centre lap only belt in my HJ 1 tonner with bench seat.

Did they originally come with centre lap belt ?

If so, Where do they bolt to on floor ?, with the stalks for driver & passenger under 1 bolt or did they have their own mounting nut in floor ?

Thanks in advance
Back to top
HK1837 Offline
#2 Posted : Sunday, 19 February 2023 11:56:24 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
Yes, all bench seat cars were 3 seat belts. The captive/welded nuts are shared with the outer seats. You need the right bolts, spacers etc. When I get time I'll scan you a picture.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
 1 user thanked HK1837 for this useful post.
Taztiger4 on 19/02/2023(UTC)
Taztiger4 Offline
#3 Posted : Sunday, 19 February 2023 9:21:01 PM(UTC)
Taztiger4

Rank: Member

Reputation:

Groups: Registered
Joined: 15/09/2022(UTC)
Posts: 84
Australia
Location: Perth

Thanks: 37 times
Originally Posted by: HK1837 Go to Quoted Post
Yes, all bench seat cars were 3 seat belts. The captive/welded nuts are shared with the outer seats. You need the right bolts, spacers etc. When I get time I'll scan you a picture.



very much appreciated if you could do that

thankyou
Back to top
HK1837 Offline
#4 Posted : Monday, 20 February 2023 6:26:05 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
Remember also, if pre 1/1/75 it will be 2 x lap/sah and 1 x centre lap belt. If 1/1/75 onwards it will be 2 x retractable and one lap belt.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
 1 user thanked HK1837 for this useful post.
Taztiger4 on 20/02/2023(UTC)
Taztiger4 Offline
#5 Posted : Monday, 20 February 2023 8:21:18 AM(UTC)
Taztiger4

Rank: Member

Reputation:

Groups: Registered
Joined: 15/09/2022(UTC)
Posts: 84
Australia
Location: Perth

Thanks: 37 times
Originally Posted by: HK1837 Go to Quoted Post
Remember also, if pre 1/1/75 it will be 2 x lap/sah and 1 x centre lap belt. If 1/1/75 onwards it will be 2 x retractable and one lap belt.



Thankyou again kind Sir, a photo or even a sketch of that arrangement would be muchly appreciated
Back to top
HK1837 Offline
#6 Posted : Monday, 20 February 2023 12:45:18 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
This will help. Section B-B down the bottom (top images are sedan/wagon)

Part/drawing number 120384 is a split washer.
Item 7 is the spacer that allows the soft belt anchor to rotate. It is the same part for sedan/wagon/statesman as well with bench seat and continues into HX and HZ.
The bit under the bolt head is item 2 (the belt buckle for the outer seating positions), it sort of shows better on the sedan section B-B. This buckle is unique to commercial but I think it is the same as the commercial with bucket seats.


_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
Taztiger4 Offline
#7 Posted : Monday, 20 February 2023 8:53:17 PM(UTC)
Taztiger4

Rank: Member

Reputation:

Groups: Registered
Joined: 15/09/2022(UTC)
Posts: 84
Australia
Location: Perth

Thanks: 37 times
Originally Posted by: HK1837 Go to Quoted Post
This will help. Section B-B down the bottom (top images are sedan/wagon)

Part/drawing number 120384 is a split washer.
Item 7 is the spacer that allows the soft belt anchor to rotate. It is the same part for sedan/wagon/statesman as well with bench seat and continues into HX and HZ.
The bit under the bolt head is item 2 (the belt buckle for the outer seating positions), it sort of shows better on the sedan section B-B. This buckle is unique to commercial but I think it is the same as the commercial with bucket seats.




Thanks again, I reckon I can make that work
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.032 seconds.