Rank: Member
Groups: Registered
Joined: 15/09/2022(UTC) Posts: 73 ![Australia]( "Australia") Location: Perth Thanks: 33 times
|
Hi
Trying to fit centre lap only belt in my HJ 1 tonner with bench seat.
Did they originally come with centre lap belt ?
If so, Where do they bolt to on floor ?, with the stalks for driver & passenger under 1 bolt or did they have their own mounting nut in floor ?
Thanks in advance
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,588
Thanks: 1 times
Was thanked: 483 time(s) in 461 post(s)
|
Yes, all bench seat cars were 3 seat belts. The captive/welded nuts are shared with the outer seats. You need the right bolts, spacers etc. When I get time I'll scan you a picture. |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
 1 user thanked HK1837 for this useful post.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 15/09/2022(UTC) Posts: 73 ![Australia]( "Australia") Location: Perth Thanks: 33 times
|
Originally Posted by: HK1837  Yes, all bench seat cars were 3 seat belts. The captive/welded nuts are shared with the outer seats. You need the right bolts, spacers etc. When I get time I'll scan you a picture. very much appreciated if you could do that thankyou
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,588
Thanks: 1 times
Was thanked: 483 time(s) in 461 post(s)
|
Remember also, if pre 1/1/75 it will be 2 x lap/sah and 1 x centre lap belt. If 1/1/75 onwards it will be 2 x retractable and one lap belt. |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
1 user thanked HK1837 for this useful post.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 15/09/2022(UTC) Posts: 73 ![Australia]( "Australia") Location: Perth Thanks: 33 times
|
Originally Posted by: HK1837 Remember also, if pre 1/1/75 it will be 2 x lap/sah and 1 x centre lap belt. If 1/1/75 onwards it will be 2 x retractable and one lap belt. Thankyou again kind Sir, a photo or even a sketch of that arrangement would be muchly appreciated
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,588
Thanks: 1 times
Was thanked: 483 time(s) in 461 post(s)
|
This will help. Section B-B down the bottom (top images are sedan/wagon) Part/drawing number 120384 is a split washer. Item 7 is the spacer that allows the soft belt anchor to rotate. It is the same part for sedan/wagon/statesman as well with bench seat and continues into HX and HZ. The bit under the bolt head is item 2 (the belt buckle for the outer seating positions), it sort of shows better on the sedan section B-B. This buckle is unique to commercial but I think it is the same as the commercial with bucket seats.  |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 15/09/2022(UTC) Posts: 73 ![Australia]( "Australia") Location: Perth Thanks: 33 times
|
Originally Posted by: HK1837 This will help. Section B-B down the bottom (top images are sedan/wagon) Part/drawing number 120384 is a split washer. Item 7 is the spacer that allows the soft belt anchor to rotate. It is the same part for sedan/wagon/statesman as well with bench seat and continues into HX and HZ. The bit under the bolt head is item 2 (the belt buckle for the outer seating positions), it sort of shows better on the sedan section B-B. This buckle is unique to commercial but I think it is the same as the commercial with bucket seats. Thanks again, I reckon I can make that work
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
