Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
304 V8 Rocker Arm Pivot Bolt Install - Dr Terry
Options Go to last post Go to first unread
Previous Topic Next Topic
HQ_SS_Andy Offline
#1 Posted : Tuesday, 21 June 2022 3:25:33 PM(UTC)
HQ_SS_Andy

Rank: Member

Reputation:

Groups: Registered
Joined: 22/08/2020(UTC)
Posts: 40
Australia
Location: Sydney

Thanks: 10 times
Was thanked: 1 time(s) in 1 post(s)
Hi All.
I am wondering if the rocker arm pivot bolts in a 304 should be loctite'd in.
If not, what stops them from backing off ? There are no spring washers.

Also, torque spec is 24-32 Nm. Seems like a big range. Would it be best to just shoot for the middle (i.e. 28Nm) ?

Rgds,
Andrew.
Back to top
8D11PCH2 Offline
#2 Posted : Tuesday, 21 June 2022 4:50:05 PM(UTC)
8D11PCH2

Rank: Member

Reputation:

Groups: Registered
Joined: 11/09/2016(UTC)
Posts: 209
Australia
Location: OZ

Was thanked: 23 time(s) in 22 post(s)
As per GMH service manuals just install them and torque them up to spec.
The rocker pivot bolt torque specs for Red & Blue 253 and 308 engines is 30nm - 38nm.

I always err towards the higher end of the torque spec range.
Back to top
WWW
HQ_SS_Andy Offline
#3 Posted : Tuesday, 21 June 2022 11:39:06 PM(UTC)
HQ_SS_Andy

Rank: Member

Reputation:

Groups: Registered
Joined: 22/08/2020(UTC)
Posts: 40
Australia
Location: Sydney

Thanks: 10 times
Was thanked: 1 time(s) in 1 post(s)
Thank you 8D11PCH2.
Rgds.
Back to top
Dr Terry Offline
#4 Posted : Wednesday, 22 June 2022 7:26:31 AM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,058

Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
I've never seen one work loose. I have however seen them broken.

Don't over-tighten them, they are only 5/16 UNC, easy to break.

Dr Terry

Edited by user Wednesday, 22 June 2022 7:27:08 AM(UTC)  | Reason: Not specified

If at first you don't succeed, just call it Version 1.0
Back to top
 1 user thanked Dr Terry for this useful post.
Smitty2 on 23/06/2022(UTC)
HQ_SS_Andy Offline
#5 Posted : Wednesday, 22 June 2022 1:07:25 PM(UTC)
HQ_SS_Andy

Rank: Member

Reputation:

Groups: Registered
Joined: 22/08/2020(UTC)
Posts: 40
Australia
Location: Sydney

Thanks: 10 times
Was thanked: 1 time(s) in 1 post(s)
Thanks Dr. Terry.
Back to top
Smitty2 Offline
#6 Posted : Thursday, 23 June 2022 9:06:57 AM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 379
Australia
Location: bayside Melbourne

Thanks: 237 times
Was thanked: 28 time(s) in 28 post(s)
Originally Posted by: HQ_SS_Andy Go to Quoted Post
Hi All.
I am wondering if the rocker arm pivot bolts in a 304 should be loctite'd in.
If not, what stops them from backing off ? There are no spring washers.

Also, torque spec is 24-32 Nm. Seems like a big range. Would it be best to just shoot for the middle (i.e. 28Nm) ?

Rgds,
Andrew.




ps.. don't forget the rocker arm pivots only go on one way too
(don't get this wrong, if you do they 'die' rather quickly)

Club circuit racing...the best fun you can have with your pants on
Back to top
 1 user thanked Smitty2 for this useful post.
HQ_SS_Andy on 23/06/2022(UTC)
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.027 seconds.